Direct Drive Linear Motor DDLM-019-070-01
Continuous Force: 10.1 Oz (2.8
N), Stroke: 0.960 in (24.4 mm)
 |
 |
 |
 |
| Housing Outside Diameter, 0.750 inch, 19.1 mm | ||||||||||
|
|
||||||||||
|
This DDLM-019-070-01 Linear Actuator can develop
10.1 oz (2.8 N) of continuous force and 32.1 oz (8.9
N) of peak force at 10% duty cycle. Having a stroke
of 0.960 in. (24.4 mm), this clean, fully enclosed
linear actuator, also referred to as an electric
cylinder is ideal for use in critical medical
applications. Measuring just 0.750 in. (19.1 mm) in.
diameter with a housing length of 2.750 in. (44.5
mm) long, this zero cogging, bi-directional actuator
is easily integrated into new and existing
applications. Each end of the shaft is threaded for direct coupling of the actuator to the load resulting in zero backlash allowing for smooth, high speed positioning, and high acceleration/deceleration resulting in greater throughput. The 0.125 in. (3.2 mm) diameter shaft has an internal thread on each end, a total of length of 4.960 in (126.0 mm), and extends 1.585 in. (40.3 mm) past the mounting end of the actuator. The shaft extends thru the 3/8-32 UNF x 0.250 (6.4 mm) long threaded studs at each end of the housing which can be used for mounting the DDL-019-070-01 linear actuator. Long life plain linear bearings support the internal shaft at both end of the actuator. |
||||||||||
| Model # | Stroke | Continuous Force | Intermittent Force @ 10% Duty Cycle | Housing Length | ||||||
| DDLM-019-070-01 | 0.960 | inch | 10.1 | oz | 32.1 | oz | 2.750 | inch | ||
Datasheet in PDF
 |
24.4 | mm | 2.8 | N | 8.9 | N | 69.9 | mm | ||
Drawing quick view
 |
||||||||||
|
|
Download 3D-STEP | |||||||||
| Share this page: |
| Tweet |
