Direct Drive Linear Motor DDLM-038-051-01
Continuous Force: 3.1 lb (14 N), Stroke: 0.375 in (9.5 mm)
 |
 |
 |
 |
| Housing Outside Diameter, 1.500 inch, 38.1 mm | ||||||||
|
|
||||||||
|
Moticont has introduced their highest force linear actuator in their DDLM Linear Actuator Series.
The DDLM-038-051-01Linear Actuator is a low cost non-commutated linear actuator that is easily integrated into new and existing applications, and is the ideal choice when upgrading from a pneumatic system.
Compact, clean, and quiet, this fully enclosed linear actuator, also referred to as an electric cylinder, is 1.500 in. (38.1 mm) in diameter with a housing length of 2.00 in. (50.4 mm) long.
Developing 3.1 lbs (14.0 N) of continuous
force and 9.9 lbs (44.1 N) of peak force at 10% duty cycle, it has a
stroke of 0.375 in. (9.5 mm). Featuring zero cogging and direct
coupling of the actuator to the load results in zero backlash and allows
for smooth, high acceleration/deceleration, and high speed positioning.
The 0.250 in. (6.4 mm) diameter shaft has an internal thread on each end, a total length of 3.8.75 in (98.4 mm), and extends 1.375 in. (34.9 mm) past the mounting ends of the actuator. The shaft extends thru the 9/16-18 UNF x 0.250 (6.4 mm) long threaded studs at each end of the housing which can be used for mounting the DDLM-038-051-01 Linear Actuator.
Long life plain linear bearings support the internal shaft at both end of the actuator and can tolerate a side load up to 5.4 lb (24.0 N). Internal return springs are available as an option. |
||||||||
| Model # | Stroke | Continuous Force | Intermittent Force @ 10% Duty Cycle | Housing Length | ||||
| DDLM-038-051-01 | 0.375 | inch | 3.1 | lb | 9.9 | lb | 2.000 | inch |
Datasheet in PDF
 |
9.5 | mm | 14.0 | N | 44.1 | N | 50.8 | mm |
Drawing quick view
 |
||||||||
|
|
Download 3D-STEP | |||||||
| Share this page: |
| Tweet |
