Motion Control Card, 600-03 Series

 

Previous Next

Motion Control Card, 600 series

This card is an easy-to-use, plug-and-play and cost effective solution for single and multi-axis motion control applications.


This series supports up to 4 axes of motion, 8 TTL / CMOS compatible inputs, 8 TTL / CMOS compatible outputs, optional analog inputs, and up to four optical encoder inputs.

 

The module may be controlled in different ways;

 

1) Externally Controlled
In this mode, the external host such as a PC, micro-controller or PLC sends a series of commands to the controller via the RS-232 serial port. The controller processes and performs the incoming commands and responds with proper messages.

 

2) Control Panel
The supplied user friendly Control Panel software allows the user to set-up the module quickly. The operator is able to move the mechanism to different positions by pressing the corresponding buttons of the Control Panel or by using the joystick and/or trackball.


Click for Programming Examples

Datasheet in PDF


Features:
  • Plug-and-Play
  • Quick and Easy to Install
  • Very Compact and Easy to Use
  • Low Power Consumption
  • Built-in Self Test
  • Different Modes of Operation
  • Host Controlled, PLC, C/C++, Visual Basic, LabVIEW™
  • Joystick / Trackball Controlled

  • Communication Interface:
  • RS-232 Interface
  • Software:
  • Easy System Setup and Evaluation
  • Menu Driven
  • Free Software Included

  • Dedicated Inputs:
  • Positive and Negative Limit Switches per Axis
  • Home Switch per Axis

  • General Purpose Digital Input / Output:
  • 8 TTL / CMOS Inputs
  • 8 TTL / CMOS Outputs
  • Quadrature Signals

  • General Purpose Analog Input:
  • 4 Inputs
  • 10 Bits of Resolution

  • Part No. Description
    600-1 Single-axis Programmable Motion Control Card

    Single-axis Programmable Motion Control Card
    600-2 Two-axis Programmable Motion Control Card

    Two-axis Programmable Motion Control Card
    600-3 Three-axis Programmable Motion Control Card

    Three-axis Programmable Motion Control Card
    600-4 Four-axis Programmable Motion Control Card

    Four-axis Programmable Motion Control Card

    Share this page: